Coastal Wood

Phone - 410.572.6880Fax - 410.572.8863

Marine Hardware, Tools & Supplies

Hot Dipped Galvanized (HDG) Hardware

Coastal Wood Industries carries hot dipped galvanized hardware. Hot dipped galvanization is a process in which metal is immersed in molten zinc. During galvanization, the molten zinc reacts with the iron in the steel to form a series of zinc/iron alloy layers. The hardness of these inner layers provides exceptional protection against coating damage through abrasion, damage caused by rough handling during transportation and at the job site as well during its service life.

Hot dipped galvanized products require very little to no maintenance, providing a vastly increased lifespan, as the result of superior corrosion protection. Environments in which galvanized steel and iron are commonly used include indoor and outdoor atmospheres, the storage of hundreds of different chemicals, in fresh water, sea water, soils, and/or concrete. Coastal Wood Industries also has 316 grade stainless steel deck screws.

Coastal Wood Industries stocks a large variety of hot dipped galvanized hardware. If we do not stock what you are looking for, just call and we can special order it for you.

Marine Hardware, Tools & Supplies

  • Hot Dipped Galvanized (HDG) Tie-Rods
  • All-Thread Rods
  • HDG Nails
  • Auger Bits
  • Wide assortment of HDG bolts:
    • Timber Head
    • Machine
    • Carriage
    • Lag
    • Nut Eye
  • Cable Clamps
  • Cant Hooks
  • Aluminum Pike Poles
  • Stainless Strapping
  • Variety of washers:
    • Timber Bolt
    • Dock
    • Flat
    • Plate
    • Ogee

Filter Cloth

Coastal Wood stocks Carthage Mills 6% open area woven monofilament geotextile fabric.  Filter cloth can have many uses.  Some of them are listed below.

  • Bulkheads
  • Under riprap or concrete revetment systems for channel, shoreline waterway protection
  • Subsurface drainage systems in problematic soils
  • Drainage/filtration/collection systems in landfills
  • Spillways and swales

Coastal Wood stocks filter fabric in rolls of 6’x100’ and 12’x300’.

End coat

Coastal Wood Industries has two types of end coat:

  • Anchorseal creates a wax barrier that protects against end checking and costly degrade in freshly sawn logs and lumber and is used with most tropical species.
    Anchorseal is known in the forest products industry as the best quality and most stable wax emulsion end sealer available.
  • Kop-Coat is an end coat that is used as a field treatment on saw cuts of treated lumber and piling. Apply Kop-Coat directly to the saw cuts for preservative treatment without the pressure.

Coastal Wood Industries stocks Anchorseal in 1 quart, 1 gallon, and 5 gallon pail sizes and Kop-Coat in a 5 gallon pail.